se a Japanese tool for car lockouts primarily on Japanese cars with thumb locks, and on some Chryslers; learn how to from our expert locksmith in this free auto emergency locksmith-training video. Japanese-Made Car Lockout Tools.

If you’ve forgotten the combination to a Master Lock combination lock, you have a few options. If the lock isn’t locked onto anything, you can make a photocopy of the serial number and send that to Master Lock for the combination. If, however, your lock is attached to something, you can break the lock, call a locksmith, use a shim, or figure out the combination. Of these options, only the last two will leave you with a usable lock without emptying your wallet. Unfortunately, there are 64,000 possible combinations on a standard 40 digit Master Lock. With this method, however, you can quickly narrow that down to 80 combinations, a workable number to try if you’ve got the time and the inclination to give it a shot.

1. Look at the Master Lock brand. This method only works with Master Lock combination locks, and may not work with all of them. It is rumored that Master Lock changed the combination algorithm on some of the newer locks, in particular those with serial numbers starting with the number 800. Some people, however, have reportedly had success cracking these with this method, too, so it may be worth a try. Check the discussion page for this article to check which serial numbers others succeed with.
2. Turn the lock’s dial clockwise to zero. It is a good idea to turn it at least three rotations first, just to make sure it’s clear.
3. Apply steady tension to the shackle and turn the dial clockwise. The shackle is the u-shaped part of the lock that goes around whatever you’re locking. To apply tension you can either pull the shackle up while holding the lock, or you can pull the lock down if the shackle is locked onto something solid. Turn the dial slowly as you apply tension. If you can’t turn the dial at all, release the shackle and turn the dial clockwise just a number or two and then try it again.
4. Find the first sticking point.
   1. As you turn the dial clockwise with tension on the shackle, you will come to a point where you can’t turn the dial anymore. Make note of where it stops. Sometimes it will stick right on the numbers, but sometimes it will be between the numbers. If so, record the number to the half (e.g. 22.5, 7.5, etc.).
   2. While continuing to apply tension to the shackle, turn the dial as far left (counter-clockwise) as you can. Make note of where it stops. Now you have a sticking “range.” (Note: Some 800XXX locks have a two number range [e.g. 28-30], this sticking point is the last digit of your lock.)
   3. Determine the sticking point by finding the number that’s in the midpoint of the sticking range. A range of 4 and 5 would have a sticking point of 4.5. A range of 22.5 and 23.5 would have a sticking point of 23.
5. Release shackle tension and turn the dial slightly past the sticking point. Turn the dial clockwise about one number from the sticking point in order to allow you to “escape” that sticking point.
6. Reapply tension to the shackle and continue turning the dial clockwise to find all the sticking points. You should find a total of twelve sticking points in one complete turn of the dial. Write them down.
7. Find the third number of the combination.
   1. Look at your list of sticking points and eliminate all those which are not whole numbers (i.e. cross off any number that ends in .5). You should eliminate 7 of the 12 numbers with this step.
   2. Of the remaining sticking points, choose the one with the unique digit in the “ones” position. Four of the remaining five numbers will share the same number in the “ones” place, so for example, if the numbers left on the list are 4, 14, 24, 27, and 34, the number 27 is the only one which does not have a four in the “ones” place. This is the third number of the combination.
8. Find the magic number. Divide the third number of the combination (27 in this case) by four and write down the remainder. In this case 27/4 = 6 remainder 3. Remember we are only concerned with the remainder, which will always be 0, 1, 2, or 3. Write down the magic number (3 in this example).
9. Find the possible first numbers of the combination. Add 4 to the magic number (3). Write down the result (7). Now add 4 to that and continue adding 4 to each resulting sum until you have gone completely around the dial once. Write down each of these numbers. Thus, for the example above the numbers would be 3, 7, 11, 15, 19, 23, 27, 31, 35, and 39. One of these numbers is the first number of the combination. (NOTE: For some 800XXX locks this will be the second number of the combination. The next set of numbers will be used as the first)
10. Find the possible second numbers in the combination. If your magic number is 0 or 1 then add 2 to it, otherwise subtract 2. Since our example magic number is 3, we subtract 2 and get 1. Write down the answer and add 4 to it. Now add 4 to each resulting sum until you have gone completely around the dial once. Thus, in the example, the numbers would be 1, 5, 9, 13, 17, 21, 25, 29, 33, and 37. One of these numbers is the second number in the combination.
11. Cross out the numbers (the possible 2ND numbers) Plus or Minus 2 [25 & 29] from the third number of the combination[27].
12. Figure out the correct combination by trial and error. You now know all the possible first numbers [3, 7, 11, 15, 19, 23, 27, 31, 35, 39], all the possible second numbers [1, 5, 9, 13, 17, 21, 33, 37], and the third number [27]. You’ve just narrowed down 64,000 combinations to only 80. Now try each combination until you find the correct one. If you’re lucky, you may need to try only a few but then again, you may need to try all 80.

For Original: www.wikihow.com

Locksmith Video School Here!

We provide the most up-to-date Locksmith training program available. Understanding the field of locksmithing is priceless in today’s financial and security conscious environment.

Our Locksmith training program has changed the financial direction of thousands of individuals seeking a new career. Whether you are looking to acquire a new trade, Start your own mobile locksmith service or Lockout service; or are seeking to enhance your skill level to fill a position in the company you are presently employed by. You have found it! The Locksmith Business is one of the most interesting professions in the world. The income potential is staggering considering the limited investment required to get started. This business in the past has been very hard to break into, well times are changing. With the rising costs of services we are seeing an enormous shortage of individuals capable of providing these services. If you are on the receiving end however, it is a very profitable career.

A person considering a career in locksmithing in the past had only two ways to learn this business.

1. 1. Work as a trainee at a lock shop for $10.00 to $28.00 an hour tops; of course as you have probably already found; finding a locksmith willing to train someone is almost impossible.
2. Enroll in a text book based correspondent’s course. Most of which are reproductions of old locksmith manuals. They will cost you plenty and teach you very little.

It is hard to convey in print such a trade as this, it will require seeing it being done.

Please read the next section of this page very carefully, It Will explain how best to navigate through our web site and the four different ways that you can purchase our Locksmith Training program.

In the menu bar at the top of this page you will see nine categories they are.

Course with tools:
This is our full locksmith training program with Manuals and Tools. It is called our Advanced Plus Program.

Courses Only:
On this page you will find two different program sets that do not include our manuals or tools. They are our Basic Course and the Advanced Course. Read the course description to understand the difference between the two. “Basic does not mean Beginner course”.

Individuals:
On this page you will find our full programs broken up into individual courses. This gives you the ability to purchase them individually. They are available on video CD that plays on Windows media player. Or on DVD.

FAQ:
This is our most frequently asked questions page.”you will learn much by reading through this page”

Misc.:This is all a miscellaneous page. You will find items such as Depth Keys and various tools.

Links:These are links to various web sites you may find informative.

Testimonials
These are individuals, corporations and government agencies that have purchased our training program.
Contact:This page is our contact and e-mail information’s page.

Corporate:
This is our locksmith training program for companies with two or more employees.

On the top right hand side of this page is a link to our down-loadable demo. If you have a high-speed Internet connection, after reading through our web site I would encourage you to watch this demo. Through it I will be discussing how our locksmith training program is laid out. As well as showing you a short clip from each Course and how best to began your professional career as a locksmith.

Start by reading through the page entitled Course with tools. It can be found on the menu bar at the top of this page.
Then carefully read through our FAQ page, also found on the menu bar at the top of the page.
Finally, click the link entitled sample video It is located in the top right-hand column of that page.

After reading through, and viewing the sample video you should have a clear understanding of our Locksmith Training Program. And you will have a deeper understanding of the entire locksmith industry.

You may also call us at 1-702-558-9012 Monday through Friday nine to five Pacific Standard Time. If you have any further questions. Please watch our sample video before calling.

Thank you for your time.   I look forward to helping you launch your new career.

Courtesy of: http://www.locksmithvideoschool.com/

How Do You Know What the Best Deadbolt Lock Is?

A deadbolt is commonly found on the entry doors to homes, and for good reason, since they are one of the most secure types of locking devices. A deadbolt consists of a lock cylinder mounted in the door, and a long, thick bolt that inserts into an opening in the door frame. The bolt is usually made of weighty steel, preferably at least one inch long. When activated, it slides into the lined opening in the door jam (the strike plate), connecting the door to the frame. The bolt can’t be moved to the open position without rotating the lock cylinder (the mechanism housed within the keyed part of the lock). Since this requires the correct key, a deadbolt is solid protection against unwanted entry.

The two main types of deadbolt locks are single and double cylinder locks. A single cylinder deadbolt has a keyed opening on one side and a knob that can be turned by hand on the other. This is commonly used on an entry door, allowing it to be locked with a key when exiting, but manually turned from the inside to let someone in.

A double cylinder deadbolt lock is keyed on both sides. This offers considerably more protection against unwanted entry since it requires a key to be opened at all. A good example of an appropriate place for a double cylinder lock is on a door that has a glass section or one located near a window. If the glass is broken and someone tries to reach in to open the door, they won’t be able to. There is one serious drawback to this arrangement, and that is the need to escape in an emergency situation. A quick exit would be hindered since a key is required to open the lock and leaving the key in the lock for such emergencies eliminates its effectiveness.

When shopping for a deadbolt, look for:

1. Grade 1 or grade 2 locks, which are stronger and can withstand kicking, prying, wrenching, hammering, sawing or drilling.
2. A steel deadbolt with a throw that is at least one inch long.
3. Strike plates that are secured with screws at least 2 1/2 to 3 inches long.
4. Five or six-pin cylinders.
5. A free spinning solid-metal cylinder collar.

In determining which type of deadbolt lock is best for your situation, keep in mind where it will be located and your goal in having a lock located there. Pick your device not just for maximum security, but for safety as well.

Courtesy of:  Super Pages

A person for hire, an institutional locksmith or industrial locksmith who originates keys and who master-keys, re-keys, re-pins, re-combinates, repairing, rebuilding, picking, adjusting, bypasses, servicing, security(locking) devices or manipulates security(locking) devices in a manner other than that intended by the manufacturer. Security devices include but not limited too – mechanical devices, electrical devices, electronic devices, safes, safe doors, vaults, safe deposit boxes, lock boxes, automatic teller machines, vehicles, or other security(locking) devices for safeguarding areas where access or exit is meant to be limited. A professional locksmith for hire must be licensed.